To get started, you will need:
For Windows device:
- OS: Windows 10 or later
- CPU: 1 core
- RAM: 1GB
- DISK: 500MB free disk space
For MacOS
- OS: MacOS Sonoma or later
- CPU: 1 core
- RAM: 1GB
- DISK: 500MB free disk space
Linux:
- OS: Ubuntu
- CPU: 1 core
- RAM: 1GB
- DISK: 500MB free disk space
What are the system requirements for running nodes on Autonomi and Storj?
- Autonomi: Supported on Windows (10+), MacOS (14 Sonoma), and Linux (Ubuntu 24.04). Recommended specifications include a 4-core CPU, 8 GB of RAM, 35 GB of spare disk space, and an 8 Mbps internet connection.
- Storj: Requirements vary based on your configuration. Recommended setups include using one processor core per storage process, dedicated non-SMR hard drives with 2 TB available per node, and specific upload/download bandwidth requirements. Check below guidelines for detailed hardware recommendations:
Storj Hardware and Network Requirements
Recommended:
- One processor core for each storage node process
- One hard drive per storage node process. NO SMR. Connect drives without RAID controllers OR configure the RAID controller to passthrough/IT mode.
- 2 TB of available space per storage node process 1.5 TB per month of transit per TB of storage node capacity; unlimited preferred 3 Mbps upload bandwidth per TB of capacity
- 5 Mbps download bandwidth per TB of capacity
- Uptime (online and operational) of 99.5% per month
Minimum:
- One processor core for each storage node process
- One hard drive per storage node process. NO SMR. Connect drives without RAID controllers OR configure the RAID controller to passthrough/IT mode.
- 500 GB of available space per storage node process
- 1.5 TB per month of transit per TB of storage node capacity 1 Mbps upload bandwidth per TB of capacity
- 3 Mbps download bandwidth per TB of capacity
- Uptime (online and operational) of 99.3% per month, max total downtime of 5 hours monthly
Comments
0 comments
Article is closed for comments.